Quote-Porous Plastic

ThermoPore's quotation to you will be as complete and detailed as the information you provide in this form. Therefore, we ask you to dictate your level of detail by simply filling in the relevant parts of this form. Don't worry; we will let you know if any important information is missing.

Step 1. Complete the first tab, Required Information. Proceed to Tab 2, Optional Information, and complete as needed.

Step 2. Determine if you need a QuickQuote, a FlexQuote, or a ThermoQuote (click on the tabs above for a overview of each).

Step 3. Select and complete one of the blue Quote tabs, Tab 3a, 3b, or 3c.

Step 4. Click the Submit button at the bottom of the applicable Quote tab.

If you need more than one quote, hit the back button after hitting the submit button in step 3 and revise the form data to suit your second RFQ. Then hit the submit button. Repeat as needed.

Please complete this page then advance to Tab#2, Optional Information.

My Company Name:
My Company's Web Site:

My Ship to Address	My Bill to Address	Same as ship to address.
Address 1:	Address 1:
Address 2:	Address 2:
City:	City:
State/Providence:	State/Providence:
Zip Code:	Zip Code:
Country:	Country:

My Contact Info.
My First Name:
My Last Name:
My Phone:
My e-mail:
My Functional Role:
Send Quote to me via:

This information is not required; however, we ask that you please review the form below as a reminder to include information that might impact ThermoPore's quotation. Next, proceed to the appropriate Quote tab.

My Shipping Preference		My Payment Preference
Shipping Carrier:		Payment Terms:
Shipping Method:		Payment Currency:
Shipping Charge:

My Packaging Req.
Labeling Specs:	Packing Slip to include Customer PO#, Vendor/Customer Part Number, Description, Rev Level, Part Qty., Lot Number.
Packaging Specs:	Bulk Package, Best Fit.
Certification:	Not required.
My other packing specification requirements listed here:	None.

Prototype Part Info.:		Production Capacity Info.:
Prototype Parts Needed?		Qty Parts -First 12 months:
Prototype Parts Needed by:		Second 12 months:
# of Prototype Parts Needed:		Third 12 months:

My Timeline:
Event#1:	(Example, first article production parts are needed in six weeks to support our initial build.)
Event#2:	(Example, 25,000 parts are needed by 12 weeks to support our first assembly production run.)
Event#3:	TBD
Event#4:	TBD
Event#5:	TBD

Your use of a ToolShare™ tool number and X-Pore™ material number make this type of quote one of the simpliest. Enter note of the ToolShare tooling number, the X-Pore Material number and request your quote. Forgot your ToolsShare™ or X-Pore™ material number? Click here for the eCatalog.

ToolShare Tool Number:
X-Pore Material Number:
X-Pore Material Properties:
Quantity:

A FlexQuote enables you to start with any one of ThermoPore's ToolShare™ geometries by selecting a desired geometry using the thumbnails on the left side of the page. Scale the geometry to your needs using the dimensional input fields. Then, select a material from ThermoPore's X-Pore™ Materials or specify your own material. Pick a tool, pick a material, and submit your request for quoation.

Single Diameter Part

Dim A:
Dim B:
Units of Measure
X-Pore™ Material:
Material Properties:
Other Material, please specify:

Single Diameter Part + Radius

FlexQuote, Single diameter geometry with radius

Dim A:
Dim B:
Radius:
Units of Measure
X-Pore™ Material:
Material Properties:
Other Material, please specify:

Two Diameter Part + Radius

FlexQuote, Two diameter geometry with radius

Dim A:
Dim B:
Dim C:
Dim D
Units of Measure
X-Pore™ Material:
Material Properties:
Other Material, please specify:

Tube - Closed Ended

Dim A:
Dim B:
Dim C:
Units of Measure
X-Pore™ Material:
Material Properties:
Other Material, please specify:

Tube - One OD, One ID

Dim A:
Dim B:
Dim C:
Units of Measure
X-Pore™ Material:
Material Properties:
Other Material, please specify:

Sheet

Dim A:
Dim B:
Dim C:
Units of Measure
X-Pore™ Material:
Material Properties:
Other Material, please specify:

Many projects just simply don't conform to a simple geometry and/or your requirements may stray from ThermoPore's listing of available materials. In these cases, you need a quotation that conforms to your project's needs. Enter ThermoQuote. Attach a part drawing (yes, we accept hand sketches drawn on the backside of napkins), attach a specification if one exists and leave the rest up to ThermoPore.

My Part Information
Part Number:		Drawing #:
Part Desc.:		Rev Level:
	Please e-mail any file attachments to RFQ@ThermoPoreCorp.com.

My Crititcal Spec. Req.
Requirement #1:
Requirement #2:
Requirement #3:
Requirement #4:

Didn't find the Quick, Flex, or ThermoQuote suitable for what you're looking to purchase? No problem, use this text box as a catchall for all other RFQs.

What I'm looking to purchase: